A.5 Notices :
1.
In order for STR to function properly, several hardware and software requirements must be
satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than
720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2.
Jumper JP2 is provided to connect to the STR LED in your system chassis. [Your chassis may
not provide this feature.] The STR LED will be illuminated when your system is in STR sleep
mode.
Suspend to RAM Installation
STR LED Connector External.
1
DIMM LED
36
+