Table of Contents
Advertisement
Picture
A
1 Contrast :
60
2 Brightness :
50
3 Sharpness :
3
4 Color :
18
5 Tint :
0
6 DNC:
4
7 Film Mode :
Off
S
Select
and edit
Back
End
Sound
A
1 Volume :
2 Balance :
3 Equalizer :
Pop
4 Option :
Stereo
5 Volume Line Out :
Aus
6 Max Startup Volume :
Aus
7 User Equalizer
S
Select
and edit
Back
End
User Equalizer
1 < 120 Hz :
2 500 Hz :
3 1,5 kHz :
4 5 kHz :
5 > 10 kHz :
Select
and edit
Back
End
14
SETTINGS
____________________________________________________________________________________
Picture settings
1
Open the »Picture« menu by pressing »
2
Select the function item by pressing »P+« or »P-«:
– »Contrast«
– »Brightness«
– »Sharpness«
– »Color«
– »Tint« (to change the colour balance)
– »DNC« (dynamic noise suppression, improves the picture if the signal is
weak)
– »Film Mode« (reduces flicker effects with external picture signals)
– »Photo CD«, picture optimisation for freeze-frames
3
Press » « or » « to set the value or switch the function on and off.
– The setting is saved automatically.
Note:
When using a PC only the »Contrast« and »Brightness« can be changed.
4
Press »i« to finish the setting.
Audio settings
1
Open the »Sound« menu by pressing »
2
Select the desired line (function) by pressing »P+« or »P-«:
– »Volume«, the current set volume is displayed
– »Balance«, the current balance setting between the left and right speaker
is displayed
– »Equalizer«, choose between flat, pop, classic, vocal, rock and jazz and
user-defined
– »Option«, choose between mono, stereo and stereo basis. Stereo basis
widens the sound output for stereo programmes, and improves the sound
with mono reception.
– »Volume Line Out«, the volume level at the »LINE OUT R L« socket
– »Max. Startup Volume«, the volume when switching on the device
– »User Equalizer«, for custom sound settings using the equaliser.
– »Volume control«, this function guarantees a uniform volume when you
switch from one channel to another.
Note:
To implement settings in the »User Equalizer« menu, select the »User« option
in the »Equaliser« row and after selecting the »User Equalizer« row, activate
the menu with »OK«.
3
Press » « or » « to set the value or switch the function on/off.
– The setting is saved automatically.
4
Press »i« to finish the setting.
« (red).
z
z
F F
« (blue).
Advertisement
Table of Contents
