Power Supply; Mains Operation; Battery Operation - Grundig FREEZZ 10 RRCD 4300 User Manual

POWER SUPPLY

Mains operation

1
~
AC
2

Battery operation

1
2
MONO/ST
Note:
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply.
If this is not the case, contact your specialist dealer.
Insert the mains cable supplied (in the battery compartment) in the
~
»AC « socket on the back of the radio recorder.
Insert the power cord plug into the socket.
Caution:
The only way to disconnect the device from the mains supply is to pull
out the plug.
Open the battery compartment by pressing the snap-catch, and remove
the lid.
Insert six batteries (6 x 1.5V/Type IEC/LR20/AM1/D size), observing
the polarity marked on the base of the battery compartment.
Note:
Remove the batteries when they are flat or when you know that the
device will not be used for a long period of time.
No liability is accepted for damage resulting from leaking batteries.
The batteries are switched off during mains operation.
Environmental note:
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
~
AC
___________________________________
MONO/ST
~
AC
19