Grundig FREEZZ 10 RRCD 4300 User Manual page 12

CD MODE
Creating a track memory
This function enables you to store up to 30 tracks on the current CD in a
certain order and then play them back in that sequence. The same track may
be stored more than once.
Selecting and storing tracks
2 5
1
2
3
4
0 2
5
Playing back the track memory
1
0 5
2
Deleting the track memory
_____________________________________________
Place a CD in the CD compartment.
– Display: the total number of tracks.
Note:
The function switch must be set to »CD«.
Press »PROG«.
– Display: »0 1 «, the »PROG
Select the track with »F-SKIP
– Display: the selected track, and the
Press »PROG« to store the track.
– Display: »0 2 « (the number of the next track), and the
indicator lights up.
To store more tracks, repeat steps
Note:
If you try to save more than 30 tracks, »F U « appears in the display.
To start playback of the track memory, press »
– Playback begins with the first stored track.
•
– The »PROG « and
To end playback of the track memory press »
The track memory is deleted when:
– You press »
STOP
7
– You press »
PLAY/PAUSE
– The CD compartment is opened
– The radio recorder is switched off using the
CD« switch
– The power supply is interrupted
•
« indicator flashes.
9 « or »R-SKIP
»PROG
3 and 4.
»PLAY/PAUSE
II
« again in the Stop position
II« in the Stop position
8 «.
•
« indicator lights up.
»PROG
PLAY/PAUSE II«.
•
« indicators light up.
«.
STOP
7
»TAPE/OFF RADIO
•
«
25