Cleaning The Tape Drive; Technical Data - Grundig FREEZZ 10 RRCD 4300 User Manual

3 1
4
3
2
2
1
28
INFORMATION

Cleaning the tape drive

To guarantee good recording and playback quality, clean the parts shown
(1, 2, 3) after every 50 hours of use, or once a month.
1 Open the tape compartment, moisten a cotton swab with alcohol or a speci-
5
al head-cleaning fluid and clean the idler (3), the capstan (2) and the
magnetic heads (1). Close the cassette compartment. You can also play a
cleaning cassette to clean the magnetic heads (1).
Protect your cassettes from humidity, dust, heat and cold.
Do not store your tapes near devices with strong magnetic fields such as tele-
visions and loudspeakers.
After using a cassette, put it back in its protective case.

Technical data

This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and
therefore the international safety regulation IEC 60065.
Never open the device casing. The manufacturer will not accept any liability
for damage resulting from improper handling.
The type plate is located on the bottom of the device.
Power supply
Mains operation: ......... 230 V, 50/60Hz
Battery operation: ................... 8 x 1.5 V
........................................(R14, UM2, C)
Output
DIN 45324, 10% THD
Music signal power: ........ 2 x 1500 mW
Sine wave power: ............ 2 x 1000 mW
Stereo headphone jack 3.5 mm ø
Radio
frequency bands
FM 87.5 ...108.0 MHz
MW 526.5 ... 1606.5 kHz
CD unit
Frequency response: .... 20 Hz ... 16 kHz
Noise voltage ratio: .................. ≥ 68 dB
_____________________________________
Tape unit
Sound recording medium: ........ Compact
Track position: International quarter-track
Tape speed: ...................... 4.76 cm/sec.
Motor: ................................... DC motor
Frequency range: ...... 125 Hz ... 10 kHz
Noise
voltage ratio: ............................ ≥ 50 dB
Band speed
fluctuation: ............................. ≤ 0.25 %
Dimensions and weight
W x H x D ............395 x 185 x 250 mm
Weight .......................................2.9 kg
Technical and design modifications reserved
cassette according
to DIN 45516