Uk Installation Instructions - Rinnai REU-VRM1120WD-E Installation And User Manual

UK INSTALLATION INSTRUCTIONS

IMPORTANT INFORMATION
This appliance may only be installed by someone certified competent to do so. At the time of
printing the only people deemed competent to install this appliance are those that are Gas
Safe registered for this type of appliance in this type of location who have a current ACS cer-
tificate.
1. Gas safety (Installation & Use) regulations 1998 are the „Rules in force‟. In your own interest and
that of safety, it is law that all gas appliances are installed by competent persons in accordance with
the above regulations. Failure to install appliances correctly could lead to prosecution. Other persons
should NOT attempt to install this equipment.
2. Building Regulations G3 require installers of unvented systems to be competent to do so. Compe-
tence can be shown by holding a current certificate in Unvented Domestic Hot Water Systems. If the
Infinity is installed in a flow and return, or tank system, or any other closed system then the system is
unvented.
3. Installation must be carried out in accordance with the current issue of the following:
Building Regulations issued by the Department of the Environment
Building Standards (Scotland) Regulations.
I.E.E. Wiring regulations for electrical installations.
Gas safety (Installation and Use) Regulations current issue.
BS 5546
BS 5440
BS 6891
BS 5482
BS 6700
BS 6644
Institute of Gas Engineers Publications
Local byelaws
Water regulations
Health and safety at work etc. Act 1974
IGE/UP/10 Part1 Edition 2.
Building Regulation J and G
Such other specifications and regulations that may supersede or complement the above documents.
It is the installer‟s responsibility to ensure that the unit has been installed to all current requirements.
Please be sure that you are fully aware of your obligations and responsibilities under these
regulations.
In case of defect parts only use genuine Rinnai components for replacement.
18