The following table describes the parameters of this page:
Field
Enable SNMP
Trap IP Address
Community name
(read-only)
Community name
(write-only)
3.6.6 Others
Choose Advance > Others, the page shown in the following figure appears.
3.7 Admin
In the navigation bar, click Admin. The Admin page that is displayed contains
Commit/Reboot, Upgrade, System Log, Password and Time Zone.
3.7.1 Commit/Reboot
Choose Admin > Commit/Reboot, the page shown in the following figure appears. You
can set the router reset to the default settings or set the router to commit the current
settings.
Description
Select it to enable SNMP function. You need to enable
SNMP, and then you can configure the parameters of
this page.
Enter the trap IP address. The trap information is sent
to the corresponding host.
The network administrators must use this password to
read the information of this router.
The network administrators must use this password to
configure the information of the router.
53