Installing Windows 98 Se (For Reference Only) - Clevo Notebook User Manual

Installing Windows 98 SE
1. Insert the Windows Boot Disk in the FDD and turn on your computer.
2. Choose option 1 "Start computer with CD-ROM support."
3. Place the Windows 98 CD into the CD-ROM drive.
4. Type D:setup. (this will start the setup process for Windows 98 CD)
5. Press Enter (your drives will be scanned for errors.)
6. Select Exit (the Windows 98 setup will now begin)
7. When the "Windows 98 Setup" program initializes, click Continue.
8. The "License Agreement" dialog box appears. Select "I accept the Agree-
ment" and click Next.
9. For "Windows Product key", enter the product's ID number and press
Next.
10.The "Select Directory" dialog box appears. Select the path of
"C:\Windows", or type another path if you prefer. Then click Next.
11.When you see "Setup Options", select "Portable" and click Next.
12.Follow the on-screen instructions and choose the recommended options.
13.Restart your computer.
Windows is now installed on your computer.
Windows Setup Notes:
- During the setup process, the system will restart several times. When it
shuts down for the first time, remove the Boot Disk.
- Allow Windows to install its default drivers.
(for reference only)
Driver and OS installation
Note
If your Windows
98 SE CD-ROM
disk is bootable,
you can change
the BIOS Setup
Utility to boot
from the CD-
ROM and install
Windows 98 SE
accordingly.
6
Warning
If you intend to
use the Suspend
to Disk power
management
function available
with your com-
puter you must
also create an
additional parti-
tion prior to
installing Win-
dows 98 or 98SE.
Refer to page 3-5,
table 3-1 for
information.
6 - 3