Setup Using Queue-Based Printing Over Ip/Ipx In Pserver Mode - Axis 5800 User Manual

Section 6 Setting Up - NetWare
64

Setup using Queue-based printing over IP/IPX in PSERVER Mode

the AXIS 5800+ Mobile to the network.
2. Connect the AXIS 5800+ Mobile to the NetWare network.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the NDS Tree.
4. Create a new Printer Agent (PA) or convert a Public Access
Printer to a Controlled one.
5. Choose the Axis Gateway configuration. Select TCP/IP or IPX as
transport protocol and complete required tasks.
6. You are now ready to print in your NDPS environment. Your
printer will appear as an NDS object in the Directory Tree and will
offer a full range of network security options.
Use the Novell Print Manager to install the controlled access
printer on a client workstation.
All previous firmware versions of Axis print servers allow users
to print in an IPX environment using traditional queue-based
printing in PSERVER mode. This method is supported in both
Bindery and NDS mode.
Axis Communications is one of the few companies in the world
that offers the possibility of printing in a Pure IP environment,
using queue-based priting in PSERVER mode. This method is
only supported by Axis print servers with firmware version 6.0
and later and only in NDS environments. Pure IP is only
supported by NetWare 5 or higher.
In a Pure IP NetWAre environment, the NetWare Administrator
should be used to create the printer, print server and queue
objects.
AXIS 5800+ Mobile User's Manual