Cautions On Wiring - Clarion NX501E Owners Manual And Installation Manual

6. Cautions on Wiring

1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
Keep them well away from the engine, and exhaust pipe, etc. Heat may
damage the wires.
3. If the fuse should blow, check to see if the wiring is correct.
If a fuse is blown, replace it with a new one of the same amperage rating as
the original (15A FUSE).
4. To replace the fuse, remove the old fuse on the back of the unit and insert
the new one. (Figure 8)
NOTE:
There are various types of fuse holder. Do not let the battery side touch other metal
parts.
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse holder
CAUTION
Fuse (15A FUSE)
Figure 8
NX501E/NZ501E 63