Elements Of The Active Route; Traffic Events - Clarion NX501E Owners Manual And Installation Manual

Type
3D buildings
3D block representation of full city building data containing actual building
size and position on the map.
2.2.3.6 Elements of the active route
Clarion Mobile Map shows the route in the following way:
Symbol
Current GPS position and
Start point
Waypoint (intermediate
destination)
Destination (end point)
Route colour
Streets and roads that are
excluded from the navigation
Streets and roads that are
affected by traffic events
2.2.3.7 Traffic events
Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
to open the Traffic Summary screen.
Tap
16 NX501E/NZ501E English
Name
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, Clarion Mobile Map uses the last
known position as the start point.
An intermediate destination of the route before
reaching the final destination.
The final destination of the route.
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
You can choose whether you want to use or avoid
certain road types (page 73). However, when
Clarion Mobile Map cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
Road segments may be affected by traffic events
received. These streets and roads are displayed
in an alternate colour, and small symbols
displayed along the route show the type of the
traffic event.
Description
Description