International Characters - Dymo 6000 User Manual

PAGE
Del
Clear All
+
Del
ESC
or
1 !
ESC
+
1 !
International
characters
®
DYMO 6000 Labelmaker
Press to create a new line of text on a label. The text height will be
scaled to fit the space available automatically.
Press + PAGE to create a new block of text, to the right
of the cursor point. For example:
The cat sat on
will show on the display as:
The cat sat on
the mat.
A page break will also occur automatically if you enter more than
four lines of text, moving the extra text over to a new block to the
right of the existing text. Page breaks are shown on the display as
a vertical dotted line; these do not appear on the printed label.
Press to delete the character to the left of the cursor.
Press to clear the complete label from the display. If the label has
already been stored in memory, it will be retained unchanged. All
function settings, e.g. width, justify, fixed length, etc. are retained.
Press ESC to escape from a selection menu or function which you
do not wish to complete.
You can create international language characters by combining a
letter and a diacritical (accent). The diacriticals available on the
keyboard are ` ´ ^ ¨ ` and ~ . To add a diacritical to a character,
enter the character first, followed immediately by the diacritical. For
example:
Press 'E' followed by '´' to get é.
You can also add a diacritical to an existing character:
• Use or to place the cursor to the right of the character to
be changed
• Press the appropriate diacritical key.
the mat.
NO ENTRY
+ PAGE NO ENTRY
13