Table of Contents
Advertisement
Installation Guide
Note:
*1 C onnect to the AUX audio input terminal and the iPod video input terminal. (Audio connection
is required only when [Analog] is selected for the iPod output signal. See Owner's Manual.)
*2 I n certain vehicles - Volkswagen/Opel/Vauxhall - it is necessary to exchange the accessory
<<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory.
*3 W hen the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the
<<Remote>> output.
D isconnect the <<blue/white>> wire and insulate the front ends of this cord. A breakdown may
occur if the cord is not disconnected, or front ends are not insulated.
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
• C onnecting the parking brake cord to lamp ground allows you to watch video images when
the parking brake is engaged.
• W hen the parking brake cord is not connected, the monitor will not display video images.
Parking brake lamp
Electro-tap
cord to battery
Parking brake signal cord
Parking brake cord (Grass-green)
Parking brake signal cord
Stopper
Parking brake cord (Grass-green)
Parking brake
NX302E
17
Advertisement
Table of Contents
