Mechanical Settings; Fan Cycler Settings - Trane TZEMT400BB32MMA User Manual

Mechanical Settings

Î Changing these settings will affect the operation of the heating/cooling system.
To view and edit these settings:
1. Press the MENU button.
2. Press and hold the two middle buttons simultaneously until the
3. Scroll to System Settings
Mechanical Settings
4. Scroll to
5. Scroll to the setting you want to change. Press the plus (+) or minus (-) button to adjust the setting.
6. Press the Done button when you are finished.
Setting Range
Type Gas/Elec or
Heatpump
Fan Type Gas or Elec
C/O Type w/Cool or w/
Heat
2nd Stage Y or N
Heat
Aux Heat Y or N
(HP)
2nd Stage Y or N
Cool

Fan Cycler Settings

Î Changing these settings will affect the operation of the heating/cooling system.
To view and edit these settings:
1. Press the MENU button.
2. Press and hold the two middle buttons simultaneously until the
Fan Cycler
3. Scroll to
4. Scroll to the setting you want to change. Press the plus (+) or minus (-) button to adjust the setting.
5. Press the Done button when you are finished.
Setting Range
Fan ON Time 0-120
minutes
Fan OFF Time 10-120
minutes
and press the Select button.
Select
and press the
Default Description
Gas/Elec Selects HVAC type, Gas/Electric or Heatpump
Gas Selects the Fan type if system is Gas or Electric
w/Cool Set the Heat pump Changeover type
N Enables the 2nd Stage Heat operation
Y Enables the Auxiliary Heat operation. Typically the Aux Heat will be
heat-strips in a Heatpump system
N Enables the 2nd Stage Cool operation
Select
and press the button.
Default Description
0 (=OFF)
The fan cycler function cycles the HVAC system fan for an ON
period followed by an Off period continuously. Used to provide
10
minimum air ventilation requirements. When the Fan ON time is
set to a value greater than 0, an additional Cycler FAN mode is
present when pressing the FAN button.
Installer Settings
button.
Installer Settings
20
menu is displayed.
menu is displayed.