Error Display - Clarion CZ200E Owner's Manual & Installation Manual

USB Devices
Problem
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display "No File"
shown.
Sound skips or is
noisy.

7. ERROR DISPLAY

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 3
ERROR 5
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
18
/ /
Cause
The USB device has been
inserted with wrong direction.
The USB connector is broken.
The USB device is damaged.
Connectors are loose.
No MP3/WMA file is stored in
the USB device.
MP3/WMA files are not encoded
properly.
Cause
Disc is inserted incorrectly.
The disc format is not supported.
This is a failure of deck's mechanism. Consult your store of purchase.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Measure
Eject the disc then reload it properly.
Try another disc.