Switching Modes (Functions); Displaying The Time And Calendar Of Cities Worldwide - Citizen C460 Instruction Manual

3. Switching Modes (Functions)

In addition to the time mode, this watch has six other modes (functions): Calendar,
Alarm 1, Alarm 2, Chronograph, Timer, and Zone Setting. Each press of the M but-
ton switches the mode in the following sequence.
S.T.
Mode
display
* If the watch is left in the Alarm 1, Alarm 2, or Zone Setting mode for approximately 2
minutes, it automatically returns to the time mode <TME> .
6
Display Mode
TME Time
CAL Calender
AL1 Alarm 1
AL2 Alarm 2
CHR Chronograph
TMR Timer
SET Zone Setting

4. Displaying the Time and Calendar of Cities Worldwide

(1) Press the M button to select the
(2) Each time the B button is pressed, a
Time
S.T.
City
name
<TME> mode or <CAL> mode.
city's name and its time (calendar) are
displayed sequentially.
Cities can be displayed in the order No.
2 → 3 ...31 → 1 → 2 (e.g., LON →
PAR...BUE → UTC → LON), as shown
in the table on the following page, or in
the opposite order, i.e., No. 2 → 1 → 31
... 3 → 2 (e.g., LON → UTC →
BUE...PAR → LON).
To switch to the opposite display se-
quence, press the A button and the B
button simultaneously.
7