Citizen C520 Instruction Manual page 16

< Accumulated time measurement >
A
(1) Press button to start or stop.
B
(2) When stopped, press button
• There is a confirmation beep upon
start, stop or reset operations.
< Split time measurement >
A
(1) Press button to start or stop.
B
(2) Pressing button during measurement displays a split time for about 10
seconds *1. (SP flashes on the display when a split time is being shown.)
You can make repeated split time measurements.
B
(3) When stopped, press button
• There is a confirmation beep upon start, stop, split time or reset operations.
*1: The watch automatically returns
to the measuring display after
10 seconds.
30
to reset.
B
A
A
RESET MEASURE
A
to reset.
B
A
A
RESET MEASURE
B
*1
A
SPLIT TIME
< Switching modes during chronograph measurement >
Measurement continues even if you press button
surement and switch to another mode. It is therefore possible to return to the
chronograph again to show the continued measurement. However, if you switch
to the Dive Mode of the Diving Modes, chronograph measurement is cancelled
and the watch returns to the reset display.
STOP
Split time: The time elapsed from the start.
Start
* If the watch is left for about 3 minutes in Chronograph Mode in the reset
STOP
state, it automatically returns to the Time/Calendar Mode.
M
Split time
Split time
during chronograph mea-
Goal
31