Electrical Connection - Electrolux ESI 6230 User Information

Electrical connection

Details about the voltage, type of supply and the fus-
es required are to be found on the rating plate. The
rating plate is located on the right-hand inner edge of
the dishwasher door.
To isolate the dishwasher from the mains, pull out the
mains plug.
Important:
– The plug must be accessible after the appliance
has been installed.
– Following installation, live parts and insulated wir-
ing must not be accessible to a test finger in ac-
cordance with DIN EN 60335-1.
Connecting systems
The water inlet hose, drain hose and the mains cable
must all be connected to the side of the dishwasher
as there is no space for them behind the appliance.
2 connection pieces 45° or straight,
outer ø 19 mm, length 30 mm
waterinlet mains
cable
36
water- mains socket
drainage
doublevalve water-
drainage
waterinlet
mains cable