What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red light of button 8 blinks, at the
same time some acoustic signals sound and one of the following alarm codes
appears on the display to indicate that the machine is not working:
E10
: problem with the water supply
●
E20
: problem with water draining
●
E40
: door open.
●
Once the problem has been eliminated, press button 8 to restart the programme. If
after all checks, the problem persists, contact your local Service Centre.
Malfunction
The washing machine
does not start:
The machine does not
fill:
Possible cause
he door has not been
T
●
closed. E40.
The plug is not properly
●
inserted in the power
socket.
There is no power at the
●
socket.
The main fuse or the
●
fuse in the plug has
blown.
The selector dial is not
●
correctly positioned and
8
button
has not been
pressed.
The delay start has been
●
selected.
The Child Safety Lock
●
has been activated.
The water tap is closed.
●
E10
The inlet hose is
●
squashed or kinked. E10
The filter in the inlet hose
●
is blocked. E10
The door is not properly
●
closed. E40
what to do if... electrolux 27
Solution
Close the door firmly.
●
Insert the plug into the
●
power socket.
Please check your
●
domestic electrical
installation.
Replace the fuse.
●
Please turn the selector
●
dial and press button
again.
If the laundry is to be
●
washed immediately,
cancel the delay start.
Deactivate the Child
●
Safety Lock.
Open the water tap.
●
Check the inlet hose
●
connection.
Clean the water inlet
●
hose filter.
Close the door firmly.
●
8