P3 Cruiser Owner's Manual- Model GB-106
1. Make certain both the front and rear frames are locked.
2. Install battery pack.
3. Install your seat.
4. Position your tiller
!
WARNING – MAKE SURE YOU TIGHTEN YOUR TILLER TO BE SURE IT IS LOCKED!
5. Unlock your front wheel lock knob.
!
WARNING – IF YOU DON'T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER WILL NOT
TURN! THIS COULD CAUSE INJURY.
Set your tiller
angle using the
tiller lock knob.
Unlock front wheel lock knob.
ASSEMBLING YOUR P3 CRUISER
Page 32
Install your Seat.
Engage your brake!