Operation - Planet Mobility GB-106 P3 Cruiser Owner's Manual

P3 Cruiser Owner's Manual- Model GB-106
When the power to your P3 Cruiser is turned on, an LED (Light Emitting Diode) will illuminate.
This LED is used in diagnosing operational problems that may arise. See "Diagnostics" section
on page 20.
Horn Button
Press this button to sound the horn.
Drive Control Lever
This self-centering drive control lever system controls your P3 Cruiser speed (up to the
maximum speed set by the speed adjustment dial) as well as the forward and reverse direction.
This control system is also called the "Wig-wag".
To drive forward:
• Place your hands on the handgrips.
• Use your thumbs to operate the drive control lever.
• Use your right thumb to press lightly on the "F" (forward motion) lever to move your
scooter forward.
• Increase the pressure applied by your thumb to increase your forward speed.
• To stop your P3 Cruiser, release all pressure on the lever. The lever will automatically return to
the center (neutral) position and your scooter will come to a gradual stop.
Note: Always bring your P3 Cruiser to a full stop before changing direction from forward
to reverse, or from reverse to forward.
To drive in reverse:
• Place your hands on the handgrips.
• Use your thumbs to operate the control levers.
• Use your left thumb to press lightly on the "R" (reverse motion) lever to move your scooter
in reverse.
• Increase the pressure applied by your thumb to increase your reverse speed.
• To stop your scooter, release all pressure on the lever. The lever will automatically return
to the center (neutral) position and your scooter will come to a gradual stop.

OPERATION

Page 12