Planet Mobility GB-106 P3 Cruiser Owner's Manual page 15

P3 Cruiser Owner's Manual- Model GB-106
Armrest Width Adjustment
To adjust the armrest width:
1. Loosen the adjustment knobs at the rear of the seat.
2. Slide the armrests in or out to the desired width.
3. Tighten the adjustment knobs.
Max arm width: 24"
!
WARNING: BE SURE ADJUSTMENT KNOBS ARE SECURELY TIGHTENED AGAINST THE
INSERTED ARM REST TUBE. DO NOT EXCEED MAXIMUM ARM WIDTH.
Seat Height Adjustment
To adjust the seat height:
1. Remove the seat by holding the Seat Rotation Lever up and lifting the seat straight up.
2. Set the seat aside.
3. Remove ball detent pin or the bolt, nut, and washers that hold the seat post in the seat pedestal.
4. Position the seat post at the desired height while aligning the holes in the seat post and
the seat pedestal.
5. Reinstall the ball detent pin or nut, bolt, and washers and tighten securely.
OPERATION
Page 14