Table of Contents
Advertisement
2 Starting Up
Feeding the Receipt Paper
1. Pull the cover from the back to lift the printer cover
and detach it
4. Lift black receipt roller
3 Key-operated Control Switch
3.1 Key switch positions
The key can be turned to five different positions:
OFF
REG
X
Z
PRG
OFF
The cash register is off
3.2 Keys
Six different keys are available for use with the cash register:
The keys provide different level of security. The key with 'P' provides full security access to all functions of the cash register including programming
Keys
No. of keys
identification
included
S
Z
P
2. Remove the paper spool
5. Feed paper through bottom of receipt roller. Close receipt
roller.
OFF
REG
X
Z
PRG
REG
Registration mode
Print report without memory
This is the mode when doing
standard transactions.
Refer to Section 9 for more details
OFF
2
X
2
X
2
X
3. Press shaft into large hole to release side cap. Insert paper roll
on the shaft so that the paper unrolls from the bottom.
6. Place printer cover back on cash register.
OFF
OFF
REG
X
Z
PRG
PRG
X
Z
Print report with
deletion
memory deletion
Refer to Section 9 for more details
Switch position
REG
X
X
X
X
X
X
X
9
RCR-75CA
OFF
REG
REG
X
X
Z
Z
PRG
PRG
Programming mode
Z
PRG
X
X
X
Advertisement
Table of Contents
