Table of Contents
Advertisement
5.3 Language options
Four different language options are available with English set as the default setting. Other languages include: French, German and Dutch.
It is recommended that you set the language prior to first use. Changing of the language can be done at any time, however all settings are deleted including cash register reports and history. You
will have therefore have to reprogram the cash register completely
Note: Proceed as follows to set to a language other than English (i.e. French)
Example: You want to set French.
• Set the key to PRG
OFF
• Select programme number 13
REG
• Confirm by pressing CASH .
X
• Enter the system option number 1
Z
PRG
.
• Use the ▲ and
input area [ ] STATUS.
• Enter the status number of the required
language via the numeric keys (In our
example, press 2 for French):
0 for English
1 for German
2 for French or
3 for Dutch.
• Confirm by pressing CASH
• Conclude programming by pressing the
SUB-TOTAL key
In order for the change of language to take effect, you must now clear the memory:
• Select programme number 80
• Confirm by pressing CASH .
• Use the ▲ and
AREA.
• Confirm by pressing CASH .
• Execute deletion by pressing CASH (to
cancel, press the SUB-TOTAL button.
5.4 Programming departments
A maximum of 42 departments can be programmed.
Note: On leaving the factory, departments 1 to 4 are already assigned tax rate 1 at 0%, 5 to 8 are assigned a tax rate of 5% and departments 9 to 14 are assigned tax rate 2 at 8%. All the
departments are set up as an itemised department with free pricing. If these settings correspond with those you need, no adjustments to the programme are necessary at this point.FREE
PRICING IS DEFINED AS A PRICE WHICH YOU MAY ENTER IN YOUR CASH REGISTER. FIXED PRICING IS A PRE-DETERMINED PRICE FOR AN ITEM (EG. EGGS AT $2.69)
5.4.1 Programmable contents
The following points can be programmed or defined for each department:
Department name
Used to program a department name. The department name is pre-programmed to Dept01, Dept02, etc.This programming step is optional. On leaving the factory, general, standard names are
pre-programmed.
Department fixed price
Allows user to set a department fixed price. The default setting is set to 'free pricing'. When entering a fixed department price, ensure that the number is set to two decimals.
Setting tax Rate
Allows you to set a specific tax rate to a specific department.
Department status
The department status is preset to a factory default setting of 0.
1
P Q R S
1
▼
keys to move to the
8
A B C
▼
keys to select ALL
▲
16
Input
3
CASH
W X Y Z
1
1
P Q R S
P Q R S
▼
▲
2
CASH
T U V
SUB-TOTAL
0
CASH
„ #
▼
CASH
CASH
Display
=P REGISTER
1- 1=
[ 1]
STATUS
=P REGISTER
11- 1=
MEMORY CLEAR
1=
PROGRAM AREA
CASHIERS AREA
DEPARTMENT AREA
PLU AREA
E-JOURNAL AREA
ALL REPORT AREA
ALL AREA
Advertisement
Table of Contents
