Denon AVC-A11XV Operating Instructions Manual page 63

Advanced Setup – Part 2
3. Audio Input Setup
Audio Input Setup
Digital In This assigns the digital input terminals for the different input
1
Assign sources.
2 EXT.IN Setup Set the EXT. IN terminal playback method.
Input
3 The playback level is corrected individually for the different input sources.
Function Lev.
Function The names of the different input source can be changed as desired and
4
Rename displayed on the display.
IEEE1394 The connected IEEE1394 device can be automatically identified to assign
5
Assign the input source.
IEEE1394 Set the function for associating playback of the connected IEEE1394
6
Auto Func. device on or off.
4. Video Setup
Video Setup
The HDMI or DVI input terminals are assigned for the different input
HDMI/DVI In
1 sources.
Assign
Select the HDMI audio signal playback method.
Component This assigns the component video input terminals for the different input
2
In Assign sources.
Video Convert
3 Set the input signal to be output from the monitor output terminal.
Mode
This sets whether or not to use the function for converting analog video
(composite video, S-Video or component video) signals into HDMI
HDMI Out
4 signals.
Assign
When using this conversion function, set the color format and video
range of the signals output from the HDMI terminal.
5 Audio Delay Set the audio delay timing to synchronize the sound and video.
This sets whether or not to display the on-screen display that appears on
On Screen
6 the monitor screen when the controls on the remote control unit or main
Display
unit are operated.
5. Advanced Playback
Advanced Playback
2ch The speaker settings can be changed specifically for playing in the 2-
1
Direct/Stereo channel direct or stereo mode.
Dolby Digital Turn the audio compression on or off when down-mixing Dolby Digital
2
Setup signals.
Auto
3 Surround Set the Auto surround mode function.
Mode
Manual EQ This parameter is for optimizing the Room EQ with which the audio
4
Setup signals are produced from the speakers.
Default settings
Input
CD DVD VDP TV DBS VCR-1 VCR-2
source
Digital
COAX 1 COAX 2 COAX 3 OPT 1 OFF OPT 2 OPT 3
Inputs
Surr.Sp = Surr.A, SW Level = +15dB
CDR /
TUNER PHONO CD DVD VDP
TAPE
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR /
TUNER PHONO CD DVD VDP
TAPE
–
Auto Function = OFF
Default settings
DVD VDP TV DBS
NONE NONE NONE NONE
DVD VDP TV DBS
1-RCA 2-RCA 3-RCA NONE
AUTO
Convert = ON, Color Space = Y Cb Cr, RGB Mode = Normal
0 ms
Function/Mode = ON, Master Volume = ON, Mode = Mode 1
Default settings
Basic
OFF
Auto Surround Mode = ON
All Channels and Frequency = 0 dB
60
ENGLISH
Page
CDR /
VCR-3 V.AUX TUNER
TAPE
42
OFF OPT 4 OPT 5 OFF
42
TV DBS VCR-1 VCR-2 VCR-3 V.AUX
43
0 dB 0 dB 0 dB 0 dB 0 dB
TV DBS VCR-1 VCR-2 VCR-3 V.AUX 43
43, 44
44
Page
VCR-1 VCR-2 VCR-3 V.AUX
44, 45
NONE NONE NONE NONE
VCR-1 VCR-2 VCR-3 V.AUX
45
NONE NONE NONE NONE
45
46
46
46
Page
47
47
47, 48
48
ENGLISH
Advanced Setup – Part 2