Denon AVC-A11XV Operating Instructions Manual page 30

ENGLISH
Basic Operation
SURROUND
STANDARD ENTER PARAMETER
CURSOR
Dolby Pro Logic II x
(Pro Logic II ) mode
• To play in the PL II x mode, set "Sp.Back" at the
Speaker Configuration setting to "1spkr" or
"2spkrs".
II
• To play in the PL x mode, set "Surround Back" at
the Power Amp Assign setting.
1
STANDARD
Press the button to select
II
the "Dolby Pro Logic x" mode.
• The Dolby Pro Logic indicator lights.
light
The mode switches as shown below each time
the STANDARD button is pressed.
II
DOLBY PL x DTS NEO:6
2
Play a program source
with the mark.
For operating instructions, refer to the manuals
of the respective components.
3
SURROUND PARAMETER
Press the
button.
• Display the surround parameter menu.
SURROUND
STANDARD
ENTER
CURSOR
SURROUND
PARAMETER
4
CURSOR F F G G
Press the or button to
select the play mode.
When the "SB CH OUT" parameter is set to
"ON". (Set "SP.Back" at the System Setup to
"1spkr" or "2spkrs").
Display
II
(Pro Logic x Cinema
* S u r r P a r a m e t e r
mode)
M O D E : P L x C
II
(Pro Logic x Music
* S u r r P a r a m e t e r
mode)
M O D E : P L x M
II
(Pro Logic x Game
* S u r r P a r a m e t e r
mode)
M O D E : P L x G
When the "SB CH OUT" parameter is set to
"OFF". (Set "SP.Back" at the System Setup to
"None").
Display
II
(Pro Logic Cinema
* S u r r P a r a m e t e r
mode)
M O D E : P L C
II
(Pro Logic Music
* S u r r P a r a m e t e r
mode)
M O D E : P L M
II
(Pro Logic Game
* S u r r P a r a m e t e r
mode)
M O D E : P L G
(Dolby Pro Logic
* S u r r P a r a m e t e r
mode)
M O D E : D O L B Y P L
5
CURSOR D D H H
Press the or
select the various surround parameters.
Example:
II
DOLBY PL x music mode screen
When set with the on screen display using the
remote control unit while in the MUSIC mode,
set the " " mark to "OPTIONS
the CURSOR D D or H H button, then press the
CURSOR F F button.
Press the ENTER button to return to the previous
screen.
6
CURSOR F F G G
Press the or
adjust the parameters setting.
DEFAULT setting:
CURSOR F F
Press the button to select
"Default Yes ", then parameters set to
0 0
default setting.
7
ENTER SURROUND
Press the or
PARAMETER
button to complete the
setting.
• There are four Dolby Surround Pro Logic modes
(NORMAL, PHANTOM, WIDE and 3 STEREO). The
AVC-A11XV sets the mode automatically according
to the types of speakers set during the system setup
process ( page 53).
27
ENGLISH
2 Surround parameters r
button to
II II
Pro Logic x and Pro Logic
Select one of the modes ("Cinema", "Music", "Pro
Logic" or "Game").
The Cinema mode is for use with stereo television
shows and all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music
and surround-encoded stereo music sources.
The Pro Logic mode emulates Dolby Laboratories'
original Dolby Pro Logic surround decoding, and may
provide better results with older, legacy surround-
encoded program material.
The Game mode is optimized for computer and/or
dedicated game box consoles, that feature stereo
analog or digital outputs. It can only be used with 2-
channel stereo sources.
" pressing
0
PANORAMA:
This mode extends the front stereo image to include
the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
button to
DIMENSION:
This control gradually adjust the soundfield either
towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
CENTER WIDTH:
This control adjust the center image so it may be
heard only from the center speaker; only from the
left/right speakers as a phantom image; or from all
three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Basic Operation
Mode: