Audio Input Setup; Setting The Digital In Assignment; Setting The Denon Link; Setting The Ext. In Setup - Denon AVC-A11XV Operating Instructions Manual

Advanced Setup – Part 1

Audio Input Setup

Make the audio-related settings.

Setting the Digital In Assignment

This setting assigns the digital input terminals of the
AVC-A11XV for the different input sources.
1
CURSOR D D H H
Press the or button to
select the "Audio Input Setup" at the
"System Setup Menu", then press the
ENTER
button.
• Display the "Audio Input Setup" menu
screen.
2
CURSOR D D H H
Press the or button to
select the "Digital In Assign" at the
"Audio Input Setup" menu, then press
ENTER
the button
• Display the "Digital In Assign" screen.
3
CURSOR D D H H
Press the or button to
select the input source, then press the
CURSOR F F G G
or button to select the
digital input terminal.
Select from among COAX 1 to 3, OPT 1 to 5.
If the same digital input terminal is selected, the
setting for the input source that was previously
assigned switches to "OFF".
The HDMI input terminal is displayed when it is
assigned to the input source at "HDMI/DVI In
Assign" ( page 44, 45).
If an input source is assigned to a device
connected with an IEEE1394 cable at "IEEE1394
Assign", the digital input connector's assignment
setting switches to "OFF".
If "Yes" is selected for "Default", the settings
are automatically reset to the default values.
4
ENTER
Press the button to enter the
setting.
• The "Audio Input Setup" menu reappears.
• The OPTICAL 2, 3 and 4 terminals on the AVC-
A11XV's rear panel are equipped with an optical
digital output terminal for recording digital audio
signals to a CD recorder, MD recorder, or other
digital audio recording deck. Use this for digital
recording between a digital audio source (stereo – 2
channel) and a digital audio recorder.
• "PHONO" cannot be selected on the "Digital In
Assign" screen.

Setting the DENON LINK

• When a DENON DVD player and the DENON LINK
have been connected, be sure to make a setting to
"DENON LINK" with the System Setup Digital In
Assignment.
• When the input mode is AUTO and the signals are
not be able to transferred by DENON LINK, the unit
automatically changes over the input to the selected
signals (ANALOG, EXT. IN or IEEE1394).
• Refer to "DENON LINK connections" (
16).
1
CURSOR D D H H
Press the or
select the input source, then press the
CURSOR F F G G
or button to select the
"DLINK".
2
CURSOR D D H H
Press the or
select the "DLINK" setting, then press
CURSOR F F G G
the or button to select the
input signal (ANALOG, EXT. IN or
IEEE1394).
Select the input for the playback of signals that
cannot be transferred by DENON LINK.
42
ENGLISH
Advanced Setup – Part 1

Setting the EXT. IN Setup

• Set the method of playback of the analog input
signal connected to the EXT. IN (8CH) terminal.
• Refer to "Connecting the external inputs (EXT. IN)
terminals" ( page 14).
1 CURSOR D D
Press the
select the "EXT. IN Setup" at the
"Audio Input Setup" menu, then press
page
ENTER
the button.
• Display the "EXT. IN Setup" screen.
button to
2
CURSOR D D
Press the
select the item to be set, then press the
CURSOR F F G G
or button to select the
parameter.
button to
Surr. Sp:
Presets the surround speakers that are used in the
EXT. IN mode.
Select according to the specifications of the player
being used. Also refer to the player's operating
instructions.
• Surr. A:
Select when using surround speakers A.
• Surr. B:
Select when using surround speakers B.
• Surr. A+B:
Select when using both surround speakers A and
B.
SW Level:
Sets the playback level of the analog signal that
was input to the EXT. IN subwoofer terminal.
Select according to the specifications of the player
being used. Also refer to the player's operating
instructions.
+15dB (default) recommended. (0, +5, +10 and
+15 can be selected.)
3
ENTER
Press the button to enter the
setting.
• The "Audio Input Setup" menu reappears.
ENGLISH
H H
or button to
H H
or button to