Recording Groups Of Faders And/Or Knobs - CAKEWALK SONAR User Manual

4. Check all the parameters you want to create envelopes for; as you check each
envelope choice, you can choose a color for the envelope by clicking the Choose
Color button that's in the lower right corner of the dialog box.
Note: You can change a plug-in envelope's color whenever you want by
highlighting its name in the effect's envelope dialog box and clicking the
Choose Color button.
5. Click OK.
All the envelopes that you checked appear in the track or bus you were working in.
You can edit them just like any other envelopes.

Recording Groups of Faders and/or Knobs

You can group various faders, knobs, and other controls together so that when you
record the movements of one fader or knob, all the controls in the group move.
To Record Groups of Faders and/or Knobs
1. Group the controls (faders, knobs, etc.) that you want to record by right-
clicking each control and choosing Group-(letter name of the group) from
the popup menu—make sure you add them to the same group.
2. Arm each control in the group by right-clicking each one and choosing Arm
for Automation from the popup menu.
3. Click the Record Automation button and move one of the controls in the group.
4. When you're through recording your automation data, click the Stop button in
the Transport toolbar.
Listen to your project and either re-record the automation, or disarm each armed
control by right-clicking each one and choosing Arm for Automation from the
popup menu, or by clicking the Disarm All Automation Controls button in the
Automation toolbar.
509