INSTALLATION AUDIOLINE CLD60 ASSEMBLY INSTRUCTIONS PARTS LIST 1 - CLD60 Telephone 1 - Telephone Handset 1 - Line cord 1 - 3 x 1.5volt AA Batteries (supplied) BATTERY The Caller Display and memory functions need 3 x 1.5 volt AA batteries to function.
AUDIOLINE CLD60 INSTALLATION SLIDE SUPPORT On the base of the CLD60 is a “slide support”. This is used to position the phone correctly for use when desk/wall mounting. Please refer to the diagram below for correct positioning. DESKTOP USE When this “slide support” is slid onto the base of the phone from the top downwards the CLD60 is ready for desk top use.
WALL INSTALLATION To install the telephone on the wall: P The CLD60 will fit directly onto the standard Telstra wall plate, or P Use the slide support as a template to mark the position of the 2 screw holes for attaching directly to the wall.
AUDIOLINE CLD60 PROGRAMMING SET DATE AND TIME To set the correct date and time on the display do the following: P Press the button (4 on the diagram on page 2) for 2 seconds and release. [STORE] The display will show "LANGUAGE".
THE TELEPHONE AUDIOLINE CLD60 MAKE A CALL Lift handset and wait for Dial Tone. Dial the number. Finish the call by replacing the handset. CALL TIMER Outgoing Calls The telephone has a call timer function that will show the length of a call on the display.
AUDIOLINE CLD60 THE TELEPHONE VOLUME CONTROL The sound level in the handset is adjusted with the switch on the side of the handset. The sound level changes between HIgh and LOw (18 on the diagram on page 2). MUTE BUTTON...
THE TELEPHONE AUDIOLINE CLD60 NETWORK FEATURE BUTTONS The buttons CW, CALL FWD 1 and 2 above the dialling buttons (12 on the diagram on page 2), are used for easy access to the frequently used Telstra network services. CALL WAITING (CW)
AUDIOLINE CLD60 THE TELEPHONE CALL FWD 1 Immediate continued When arriving home you can cancel the immediate call forward by # Lift the handset # Press the button [CALL FWD 1] # Listen for the facility tone and replace the handset.
CALLING NUMBER DISPLAY AUDIOLINE CLD60 CALLER DISPLAY The Caller Display function will allow you to see in the telephone display the phone number of the person calling you before you answer an incoming call. The CLD 60 is also able to display the number of an incoming call when you are on the telephone, Calling Number Display on Call Waiting, giving you the freedom to decide if you will talk to the caller.
AUDIOLINE CLD60 CALLING NUMBER DISPLAY TO VIEW THE NEW CALL INFORMATION By using the UP or the DOWN arrows you can view the new phone numbers in the display. The phone numbers display in time order. The UP arrow scrolls from the beginning of the memory, the oldest phone number will be displayed first.
CALLING NUMBER DISPLAY AUDIOLINE CLD60 ERASE CALLER DISPLAY NUMBER Removing a phone number from the Caller Display memory can be done in two ways, one by one or all at a time. ERASE ONE NUMBER P Scroll to the number you want to erase.
AUDIOLINE CLD60 CALLING NUMBER DISPLAY AUTODIAL With this function the telephone will automatically dial the number which shows in the display. To autodial a number, do the following: P Press the UP or the DOWN arrows to scroll to the desired number...
PHONE BOOK AUDIOLINE CLD60 TEXT INPUT When you want to store name and number information in the PHONE BOOK you will need to use letters and numbers. The Table below shows the multiple functions of the push button dial. Push button number 4 has 4 characters G, H, I, or 4.
AUDIOLINE CLD60 PHONE BOOK STORE PHONE NUMBER/NAME To store information in the PHONE BOOK do the following: P Press the button. The display will show how many number/names there [MEMORY] are stored in the PHONE BOOK. P Press button. [ERASE] P Enter the phone number (incl.
PHONE BOOK AUDIOLINE CLD60 ERASE NUMBER/NAME To erase a number/name from the PHONE BOOK do the following: P Press the button, and the display will show how many number/names [MEMORY] there are stored in the PHONE BOOK. P Press the UP...
AUDIOLINE CLD60 SPECIAL FUNCTIONS LEAST COST ROUTING(LCR) In countries where there are more than one telecommunications carrier you are not limited to using only one telephone network. If, for example, international calls are cheaper on another network, you can program the telephone to automatically connect you to that alternative network when you make the international call.
Page 20
SPECIAL FUNCTIONS AUDIOLINE CLD60 TO PROGRAM LCR # Press the button down for 2 seconds, release the button. [STORE] The display will show "LANGUAGE". # Press the DOWN arrow. The display will show "LCR". # Press button. The display will show "OFF".
AUDIOLINE CLD60 SPECIAL FUNCTIONS E-MAIL INDICATOR With Email becoming more popular it could become a problem for a individuals with access to the Internet, to call the Internet Service Provider (ISP) every time to check if there is any Email waiting.
IF THE CALLER DISPLAY DOES NOT WORK If the Caller Display does not work, first make contact with your network provider to see # The service is activated in your area. # Check that your subscription to the service is up to date. # Ensure you have followed the instructions in this manual.
AUDIOLINE CLD60 OTHER INFORMATION WARNING It is recommended that you disconnect your telephone during a thunderstorm as you can get a shock from your telephone (and other electrical appliances). We recommend you follow these simple precautions during a thunderstorm: # Do not use your telephone unless the call is urgent.
GUARANTEE AUDIOLINE CLD60 GUARANTEE If you believe your CLD 60 is malfunctioning, please refer to the relevant section and/or consult the troubleshooting guide in this manual to ensure that you have followed the instructions carefully. The CLD 60 is guaranteed for a period of 12 months from the date of purchase. In the unlikely event of a fault during this period, please contact our Helpline for assistance.
Need help?
Do you have a question about the CLD60 and is the answer not in the manual?
Questions and answers