Note; Replacing The Oven Light - Bosch HSN252B Instruction Manual

Note

Replacing the oven
light
q There may be a gentle buzzing as the hotplates
heat up. The heat may show differently on the
individual hotplates. This is a technical feature and
does not influence quality or function.
q Depending on the angle of vision, the red glowing
heat may appear to spread beyond the marked
boundary of the hotplate.
q The heat below the hotplate is controlled by
switching the hotplate on and off. If you select a
low heat setting, the heat will switch off more often
while at the highest heat setting this will seldom
occur.
q Glass ceramic may display surface area
irregularities inherent to the material. The glassy
surface area of the hob means that tiny blisters
with a diameter of less than 1 mm may appear,
with varying intensity. They do not affect the
function or the durability of the glass ceramic hob.
q White glass ceramic hob:
The hobs turn yellow/green when they become
hot. This colouring disappears when they cool
down.
If the oven light fails, it must be replaced. You can do
this yourself. Heat resistant spare bulbs are available
from your local specialist. To this end, please specify
the E number and FD number of your appliance. Only
use these bulbs.
Method:
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the bulb cover in the oven interior by
turning it anti clockwise.
4.
Replace the bulb with one of the same type.
5.
Screw the bulb cover back on.
6.
Remove the tea towel.
7.
Switch on the fuse again.
You can also replace the bulb cover yourself.
41