Positioning Of Field Assembled Parts - Lennox Hearth Products Signature X-FIRES-1000-NG Installation And Operation Manual

6.0 POSITIONING OF FIELD REMOVABLE PARTS
Glass Door Removal:
Remove the four (4)
screws indicated, then
lift door off.
As our policy is one of continuous improvement and development, we hope therefore you will
Figure 12
understand we must retain the right to amend details and/or specifications without prior notice.
4 off burner
installation
positions
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
WARNING
Failure to position the parts in
accordance with these diagrams
or failure to use only parts specifi-
cally approved with this heater
may result in property damage
or personal injury.
Visual check for cor-
rect pilot flame.
Figure 13
17