Electrolux EFC9660 User Manual page 20

20 20 20 20 20 electr electr electrolux electr electr olux installation olux olux olux
Installation Installation
Installation Installation Installation
GB
Make sur Make sur Make sure that the cooker hood is disconnected fr Make sur Make sur e that the cooker hood is disconnected fr e that the cooker hood is disconnected fr e that the cooker hood is disconnected from the power supply befor e that the cooker hood is disconnected fr
carrying out the installation. carrying out the installation.
carrying out the installation. carrying out the installation. carrying out the installation.
Remove the anti-fat filter and the carbon filter support frame.
• Mark the wall with a centre line, this will aid mounting procedure (1)
template so that the mid line printed on the template matches with the centre
line previously drawn, the lower side of the template corresponds to the lower
side of the hood once mounted (2)
• Drill two holes Ø 8mm and fix the support bracket with two wall plugs and
screws (3) (3) (3). Hang the hood (4) (3) (3)
• From the inside of the hood sign 1 point for definitive fixing (7)
• Remove the hood (8)
• Drill two holes Ø 8mm on the upper side close to the ceilling, fit two wall plugs
(11) (11) (11) (In case the hood is to be used in filter version (11) (11)
the chimney support with 4 screws) and fix the chimney support G G G G G with two
screws (12) (12) (12). (12)
(12)
• Hang the hood again (13)
• Fit an exhausting pipe (15)
outside (Extractor hood) or to the deflector F F F F F (Filter version).
• Make electrical connection (16)
(2) (2) (2) (2).
(4) (4) and adjust its position (5-6) (4) (4)
(8) (8) (8) (8) and drill 1 hole Ø 8mm (9)
(13) (13) (13) and fix it definitively with 1 screw (14)
(13)
(15) to connect the outlet hole B B B B B of the hood to the (15) (15) (15)
(16). (16) (16)
(16)
om the power supply befor om the power supply befor om the power supply before e e e e om the power supply befor
(5-6) (5-6). (5-6)
(5-6)
(9) (9), fit 1 wall plug (10) (9) (9)
filter version, mount the deflector F F F F F on filter version filter version filter version
(1) (1), position the (1) (1)
(7) (7). (7) (7)
(10) (10)
(10). (10)
(14) (14). (14)
(14)