Dvr; Device - Planet DVR-460 User Manual

4/8-channel mpeg-4 digital video recorder

Hide thumbs Also See for DVR-460:

Table of Contents

7.5.2 DVR

Each camera channel can be adjusted independently. Select the desired camera channel and press "Edit" to enter the

setting box.

‧ DVR-Camera Function:

a. Title: Enter the camera channel name up to 6 characters.

b. Adjustment: Adjust the BR (brightness) / CT (contrast) / ST (saturation) / HUE / COV / REC values of a camera.

c. After setting, press "OK" and then press "APPLY" button to confirm.

Select the device type (CAMERA / PTZ) according to the connected cameras for each channel. Press "Edit" to enter

the setting box.

‧ The submenu items are described below:

a. Device Type: Choose either normal camera or PTZ camera.

b. ID No.: Set the ID number (0 ~ 255) of the installed external PTZ device.

c. Protocol Type: Choose "NORMAL" protocol for our own brand camera. Choose "P-D" protocol for PELCO-D

protocol camera.

d. Baud Rate: Set the baud rate of each channel (2400, 4800, 9600, 19200, 38400, 57600, 115200).

e. After setting, press "OK" and then press "APPLY" button to confirm.

Note: This function can also be setup at the DVR side, please refer to section "6.4.5 Remote" at page 30.

-52-

LICENSED SOFTWARE AP

Table of Contents

Dvr-860