General Settings; Tuning Band; Auto Channel Search; Adding/Deleting Channels - GoVideo VR3845 User Manual

General Settings

Tuning Band

Specifies whether the DVD Recorder+VCR
is connected to an antenna or cable TV
source.
1
Press SETUP.
2
Select "GENERAL" > "Tuning Band" .
3
Choose from the following:
TV - Select if the DVD Recorder+VCR
is connected to an antenna.
CATV - Select if the DVD
Recorder+VCR is connected to a cable
TV source.

Auto Channel Search

Automatically searches for all available
TV stations from antenna or cable TV.
1
Press SETUP.
2
Select "GENERAL" > "Auto Channel
Set" > "Start" .
• The DVD Recorder+VCR searches
for all available stations.This may
take several minutes to complete.
NOTE:
• If you receive channels from a cable
box or satellite receiver, there is no
need to set the Tuning Band or search
for channels.

Adding/Deleting Channels

Allows you to manually add or delete
channels.
1
Press SETUP.
2
Select "GENERAL" > "CH. Add/Del"
>"Edit" .
3
Add or delete channels:
• Use CH or 0-9 to select the
desired channel, then press .
• Press ENTER to add or delete the
selected channel.
22
DVD Recorder+VCR User's Guide
Tuning Band
TV
CATV
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Power Save Mode
Factory Set
Prev. Select
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Power Save Mode
Factory Set
Prev. Select
Add
Ch. 2
Delete
0-9 Input
Close
Close
Stop
11%
Close