Progressive Scan; Power Save Mode; Factory Settings; Dvd Recorder+Vcr User's Guide - GoVideo VR3845 User Manual

General Settings

Progressive Scan

Activates the Progressive Scan output to
your TV.
1
Press SETUP.
2
Select"GENERAL">"Progressive Scan".
3
Turn Progressive Scan on or off.
• Only activate Progressive Scan if
your TV is capable of receiving a
Progressive Scan signal.
NOTE:
• If your enable Progressive Scan
accidentally, the picture will be
distorted.To reset the unit, first
remove any disc or tape in the unit,
then press and hold the STOP
button for 5 seconds.

Power Save Mode

Sets the DVD Recorder+VCR to an
economical power saving mode.
1
Press SETUP.
2
Select "GENERAL" > "Power Save
Mode" .
3
Turn Power Save Mode on or
off.

Factory Settings

Restores the DVD Recorder+VCR to its
original factory settings.
1
Press SETUP.
2
Select "GENERAL" > "Factory Set" >
"SET" .
3
Select "OK" and press ENTER.
• All menu settings will be restored to
their factory defaults.
• Some settings cannot be reset, in-
cluding the Parental Control, Pass-
word, and Area Code settings.
24

DVD Recorder+VCR User's Guide

(continued)
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Power Save Mode
Factory Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Power Save Mode
Factory Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
It initializes the system status.
TV Aspect
Proceed?
Progressive Scan
Power Save Mode
Factory Set
OFF
ON
Prev. Select Close
OFF
ON
Prev. Select Close
Cancel
OK
SET
Prev. Select Close