Nas Function - Emtec Movie Cube S800 Instructions Manual

11. NAS Function

This player can be used as a NAS (Network-Attached Storage) device. It can be attached to
the home network via either Ethernet or WLAN. This feature allows homes to store and
retrieve large amounts of data more affordable than ever before.
When the network connection is done correctly and ready for use, please activate the NAS
mode in the setup menu in advance (refer to 7.6 Changing Network Settings for more
details), and then type: \\NAS or \\IP Address in the Run window (click Run in the start menu)
or the address bar of Internet Explorer on your PC (For example, if the IP address of the player
is 192.168.0.9, please type: \\192.168.0.9 or \\NAS), and click OK or press the Enter button on
the keyboard.
Then you can view, and edit the files stored on the hard disk installed on the player. In this way,
you can also playback and copy files via network between your PC and the player.
Note:
1. Partitions of NTFS file system format on the hard disc drive might be read-only;
2. Please turn on the NAS mode in the setup menu before using this function
69 / 84