Erasing All Tracks (Cd-Rw) - Teac CD-RW890 Owner's Manual

1
Load a recorded CD-RW.
2
Press the ERASE button twice.
"ERASE DISC" appears.
<
Each time the ERASE button is pressed, the display changes as
follows:
(#: The last track number)
Total number of tracks and total playback time
<
If only one track is recorded, "ERASE" and the last track number do
not appear. The display changes in the following order:
Total number of tracks and total playback time
< H) button to stop erasing.
Press the Stop (
<
If a finalized disc is inserted, "UNFINALIZE" appears. To erase the
track(s), unfinalize the disc first.

Erasing All Tracks (CD-RW)

3
Press the Play (y) button to start erasing.
All tracks will be erased.
The time required appears on the display.
When the operation has been finished, the display returns to the
track/time display.
<
Never turn the power off nor unplug the power cord during
erasing.
<
During erasing, no buttons will work.
<
This operation cannot be undone. Before erasing the tracks, make
sure that you really want to erase them.
23