Honda CRF250X Owner's Manual & Competition Handbook page 91

250X_084-103.qxd 08.7.3 15:12 ページ85
5. Pour the recommended fork oil (page 84) into
the outer tube.
Fork Oil Capacity
Standard 4.12 N/mm (23.53 lbf/in) Fork Spring
No mark
(factory products)
or
2 scribe marks
(aftermarket parts)
Standard oil 345 cm 3
capacity 11.7 US oz,
12.1 Imp oz
Maximum oil 399 cm 3 Slightly stiffer as
capacity 13.5 US oz, it nears full
14.0 Imp oz compression.
303 cm 3
Minimum oil Slightly softer as
10.2 US oz,
capacity it nears full
10.7 Imp oz
compression.
Optional Softer 3.92 N/mm (22.38 lbf/in) Fork Spring
3 scribe marks
Standard oil 350 cm 3
capacity 11.8 US oz,
12.3 Imp oz
Maximum oil 404 cm 3 Slightly stiffer as
capacity it nears full
13.7 US oz,
14.2 Imp oz compression.
308 cm 3
Minimum oil Slightly softer as
10.4 US oz,
capacity it nears full
10.8 Imp oz
compression.
Optional Stiffer 4.31 N/mm (24.61 lbf/in) Fork Spring
1 scribe mark
Standard oil 348 cm 3
capacity 11.8 US oz,
12.2 Imp oz
Maximum oil 402 cm 3 Slightly stiffer as
capacity 13.6 US oz, it nears full
14.2 Imp oz compression.
306 cm 3
Minimum oil Slightly softer as
10.3 US oz,
capacity it nears full
10.8 Imp oz compression.
Be sure the oil capacity is the same in both fork legs.
Suspension
6. Check that the O-ring (10) on the fork damper
(2) is in good condition. Apply the
recommended fork oil to the O-ring.
(10)
(2)
(1)
(1) outer tube (10) O-ring
(2) fork damper
7. Temporarily install the fork damper (2) to the
outer tube (1).
After installing the fork leg (page 117) tighten
the fork damper to the specified torque:
Actual:
34 N·m (3.5 kgf·m, 25 lbf·ft)
Torque wrench scale reading:
31 N·m (3.2 kgf·m, 23 lbf·ft)
Servicing Your Honda
85