Advertisement
Assembly Instructions
STEP 1: Drill the KB600 Bracket supplied with your speakers to match the below drawing using
an 11/32" drill bit. You will need to open the center hole with the bit and remove burrs from each
hole.
STEP 2: Attach the Collar Bracket (Item 1) to the Speaker Plate (Item 3) using the two M6x16 bolts
(Item 5) for each speaker as shown below.
4
1
3
5
STEP 3: Attach the Kicker Speaker Bracket (Item 8) to the Speaker Plate (Item 3) using One M8x35
bolt (Item 6) in the center and Two M8x12 bolts (Item 7) as shown below.
8
Make sure all bolts are tightened securely (15 ft-lbs) and we recommend using loctite on each
thread to ensure they do not loosen from the vibration they will experience on the tower.
3 of 4
Pg
MTWTK-V1-010104
Copyright 2002-2004, Monster Tower, LLC
Advertisement
