Table of Contents
Advertisement
Time
Hour Code
12:00
Midnight
1:00 AM
2:00 AM
3:00 AM
4:00 AM
5:00 AM
6:00 AM
7:00 AM
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad. If programmed, your system keypad may
sound for any of the following reasons:
ƒ
Beeps for all keypresses.
ƒ
Sounds a continuous tone during the Entry delay time.
ƒ
Pulses when a day zone is violated while the system is disarmed.
ƒ
Pulses when a FIRE zone has a trouble condition.
ƒ
Beeps 3 times for trying to arm with the "Ready" light off, if "Force Arming"
has not been selected.
ƒ
Beeps for 1 second or emits a "ding-dong" sound for the "Chime" feature.
ƒ
Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit
delay; and beeps 1 second at the end of the exit delay.
ƒ
Pulses when the armed status changes and the AC power is off.
ƒ
Pulses when the armed status changes and any zone(s) are bypassed.
ƒ
Pulses when the armed status changes and a low battery is detected.
ƒ
Pulses when the armed status changes and a Tamper condition is detected.
ƒ
Beeps to indicate Telephone Line Cut, if selected.
ƒ
Pulses when one or more of the following conditions are detected: Zone or
Box Tamper, Low Battery, AC Power Fail, or Expander trouble.
Entering a valid code will silence the keypad sounder when it is pulsing. The
arm/disarm state of your system will not change when entering a code to silence
a pulsing keypad sounder. Please contact your installer if a trouble condition
exists.
14
Time
00
8:00 AM
01
9:00 AM
02
10:00 AM
03
11:00 AM
12:00
04
Noon
05
1:00 PM
06
2:00 PM
07
3:00 PM
Hour Code
08
09
5:00 PM
10
6:00 PM
11
7:00 PM
12
13
9:00 PM
14
10:00 PM
15
11:00 PM
Time
Hour Code
4:00 PM
16
17
18
19
8:00 PM
20
21
22
23
Hide quick links:
Advertisement
Table of Contents
