American Dynamics VideoEdge Installation & Operation Manual page 59


Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1. Click on the Enable Alarm button on the left side of the record to enter the "Alarm Application
Enable Setting" page.
MJPEG mode
2. Click "Enable Alarm – Trigger an Alarm When Ethernet Is Lost" to checkmark the box and
activate the function.
3. Click "Enable Alarm – Upload Via FTP" to checkmark the box and activate the function (in the
MJPEG mode and PAL system only).
4. Click "Enable Alarm – Save Into SD card" to checkmark the box and activate the function.
5. Click "Enable Alarm – Upload Via SMTP" to checkmark the box and activate the function (in the
MJPEG mode and PAL system only).
6. Enter the "Alarm Duration" you have chosen.
7. Click on the Submit button to submit the new setting of the recording.
8. Click on the Home button to return to the home page.
Description of function keys:
Enable ALARM – Trigger an Alarm
When Ethernet Is Lost:
Enable Alarm – Upload Via FTP:
Enable Alarm – Save Into SD card:
Enable Alarm – Upload Via SMTP:
Alarm Duration:
58
Activates or deactivates the alarm triggering while the
Ethernet lost.
Activates or deactivates the alarm recording upload to
the FTP.
Activates or deactivates the alarm recording to be
saved to the SD card.
Activates or deactivates the alarm recording upload to
the SMTP.
Predetermines the length of the alarm.
Installation & Operation Guide
MPEG4 mode