Change The Network Setting - American Dynamics VideoEdge Installation & Operation Manual

Installation & Operation Guide

5.1.3 Change the Network Setting

Please follow the steps below to change the network settings through the network as necessary.

Set the network options and IP address.
1. Click on the Network button in the home page to enter the Network page.
The accessible networks here are the "FTP" (for PAL only), "SMTP" (for PAL only), "SNTP",
"DDNS", "PPPoE", "UPnP" and the "Traffic".
2. When setting the Enable DHCP have not been checkmarked, enter the "IP Address",
"Netmask", "Default gateway", "Primary Nameserver", and "HTTP Port" as necessary.
3. Click on the Submit button to submit the new network setting.
4. Click on the Home button to return to the home page.
35