1. Front Panel and Rear Panel -- Front Panel -- -- Rear Panel -- 1 MICROPHONE: The IP camera has an additional audio function. The device has a microphone built into its front panel which records sound. 2 Plug Inlet: A DC 12V inlet that connects to an external power supply. 3 ETHERNET (PoE): This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks.
Quick Setup Guide 2. Flank Panel -- Left Flank Panel -- -- Right Flank Panel -- 1. Lens Mount: This IP camera is used with either a C or a CS mount lens. 2. DIP Switch: 1. AES: Auto electric shutter. 2.
3 . Install, configure and set the Network Camera The IP Box Camera default setting is DHCP OFF. Users can build the IP Box Camera working environment with a static IP address. The default static IP is 192.168.1.168. You can set an IP address for the IP Box Camera if the LAN unit isn’t connected to a DHCP server.
Page 7
Quick Setup Guide Note: Before linking the USB connector with the camera and your PC, remember to remove the SD card in the camera, otherwise the PC will directly show the SD card's information, not the "USB configuration" window. Step 3: Plug the USB connector to your PC and the USB socket on the left flank panel. A window pops up asking if you want to "Run the program", "Open folder to view files", or "...
pecifications High Resolution Day & Night IP Camera ADCIPEBPN VideoEdge IP Box Camera, PoE/12VDC, NTSC, w/PS Model VideoEdge IP Box Camera, PoE/12VDC, PAL, EU Plug, w/PS ADCIPEBPPE VideoEdge IP Box Camera, PoE/12VDC, PAL, UK Plug, w/PS ADCIPEBPPU Video sensor 1/3" Sony Super HAD CCD (with HQ1 DSP) System NTSC / PAL Horizontal resolution...
Need help?
Do you have a question about the VideoEdge ADCIPEBPPU and is the answer not in the manual?
Questions and answers