Jacuzzi BM43000 Installation Instructions Manual
Jacuzzi BM43000 Installation Instructions Manual

Jacuzzi BM43000 Installation Instructions Manual

Undermount lavatory

Advertisement

Quick Links

UNDERMOUNT LAVATORY

INSTALLATION INSTRUCTIONS

Installer: Leave this manual for homeowner.
Homeowner: Read this manual and keep for future reference.
Save These Instructions for Future Use.
Date Purchased _________________________________________
Purchased From _________________________________________
Installed By _____________________________________________
Serial Number ___________________________________________
Model __________________________________________________
Owner's Record
©2004 Jacuzzi Whirlpool Bath Products BM43000 10/04

Advertisement

Table of Contents
loading

Summary of Contents for Jacuzzi BM43000

  • Page 1: Installation Instructions

    Installer: Leave this manual for homeowner. Homeowner: Read this manual and keep for future reference. Save These Instructions for Future Use. Owner's Record Date Purchased _________________________________________ Purchased From _________________________________________ Installed By _____________________________________________ Serial Number ___________________________________________ Model __________________________________________________ ©2004 Jacuzzi Whirlpool Bath Products BM43000 10/04...
  • Page 2: Before You Begin

    BEFORE YOU BEGIN READ AND FOLLOW ALL INSTRUCTIONS ! Observe all local plumbing and building codes. ! Carefully inspect the new lavatory for damage. ! If the existing lavatory does not have supply shut-off valves, you will install them before installing the new lavatory. ! Rough-in information is included with your lavatory.
  • Page 3 REMOVING YOUR OLD LAVATORY For new construction begin with INSTALLING YOUR NEW LAVATORY Turn off the water supply. This is done by closing the two shut-off valves located under the lavatory. If there are no shut-off valves leading to the lavatory, you must turn off the water at the main valve.
  • Page 4 INSTALLING YOUR NEW LAVATORY There are many ways to install an undermount sink, and the details of the installation will depend on the quality of your cabinets and countertop. This installation guide describes only one way of installing an undermount sink. These instructions assume that you are working with a base cabinet with no sink or countertop currently installed.
  • Page 5 Installer must determine the best way to drill holes in the countertop, ensuring proper alignment with the sink without damaging the finished countertop surface. Install the faucet according to the faucet installation instructions, inserting the faucet through the faucet holes in the sink and the countertop. The faucet holes in the sink have been enlarged to allow the faucet to be raised through the countertop.
  • Page 6: Care And Cleaning

    QUESTIONS? / PROBLEMS? Please review the Installation Instructions in this manual to ensure correct installation. For additional assistance, please call: Jacuzzi Whirlpool Bath Service Support Department 1-800-288-4002. If you need assistance with operation or maintenance related questions, please call our Service Support Department at 1-800-288-4002.
  • Page 7: Limited Warranty

    LIMITED WARRANTY JACUZZI WHIRLPOOL BATH (“Jacuzzi Whirlpool Bath”, “we”, “us”, “our”), warrants to the original consumer/purchaser for the applicable warranty period set forth below, that the products we sell are free from defects in material and workmanship, except as otherwise indicated below.
  • Page 8 Jacuzzi Whirlpool Bath representative, at our option and in our sole discretion, we will either repair or replace the product with a Jacuzzi Whirlpool Bath product of the same or similar type and size; provided, however, that we will not pay any costs (labor or otherwise) associated with either removing a previously installed product;...

Table of Contents