Navigating A Trail - Lowrance Elite 5 Sonar/GPS Installation & Operation Manual

Chart Operation
Edit and New Trail menus
Allows you to edit/create trails, select trails names,
trail color, trail display and the trail being recorded.
You can also convert a trail into a route from the Edit
Trail menu.
Turns on/
off trail
display
on map
Edit Trails menu

Navigating a trail

A trail must be saved as a route before it can be
navigated.
To save a trail as a route:
1. Highlight the desired trail on the Trails
screen and press EnTER. The Edit
Trail menu will appear.
2. Highlight
The Edit Route menu will appear.
3. Highlight the
EnTER.
4. For navigation instructions refer to the
Navigating a route segment.
Turns on/
off trail
recording Displayed and Record
Displayed allows you to show/hide trails on the map
display, preventing the screen from being cluttered
with trails.
The Record command allows you to record or resume
recording a desired trail.
32
Create Route and press EnTER.
Accept button and press