Technical Specifications - Crate CA15 User Manual

Technical Specifications:

Output Power Rating: 12+ watts RMS @ 5% THD, 4 ohm load
Low: ±15dB @ 80Hz
Mid: ±15dB @ 650Hz
High: ±15dB @ 10kHz
Input Impedance: 1.5M ohm
Max Input Signal: 7v peak to peak
Total System Gain: 52dB @ 1kHz
Input Sensitivity: 20mV
Internal Speakers: 8" Crate Custom Design, 4 ohm, 15 watts; Piezo Tweeter
Power Requirements: 120VAC, 60Hz, 30VA
Size and Weight: 14"H x 14"W x 12"D, 21 lbs.
Specifications and information in this manual are subject to change without notice.
Manufacturer's Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri, 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500 of UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
FCC standards 47CFR 15.107 and 15.109 Class A
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175
©2004 SLM Electronics • A Division of St. Louis Music Co.
1400 Ferguson Avenue • St. Louis, MO 63133
CA15 Acoustic Amplifier
100/115VAC, 50/60Hz, 30VA
230VAC, 50/60Hz, 30VA
Declaration Of Conformity
www.crateamps.com
47-936-01 • 032504