Advertisement
Quick Links
Advertisement
Related Manuals for Crate CA125
Summary of Contents for Crate CA125
- Page 2 The CA125 was designed, evaluated, tweaked and redesigned by musicians and music loving engineers. Highly sophisticated computer driven assembly machines and highly skilled assemblers use only the finest components to produce each amp.
-
Page 3: Technical Specifications
Crate Acoustic amplifiers are Made With Pride in the U.S.A. To get this amplifier to sound its best, read this owner’s guide prior to its use. To keep this amplifier looking its best, avoid abrasive cleansers. Wipe the cab- inet clean using a slightly dampened cloth. -
Page 4: On The Front Panel
24: Graphic EQ. Use these sliders to control the output frequencies indi- cated below each control. The center position of each control is flat (no boost or cut). Use the graphic EQ to adjust the output of the CA125 to best suit your tastes and to compensate for room acoustics. -
Page 5: On The Rear Panel
CA125 can be eliminated without affecting the overall sound. that case, leave the CA125’s Freq and Cut controls fully counter-clock- wise. However, if you do encounter feedback while playing, set the Cut control to -30dB (fully clockwise) and adjust the Freq control until the feedback is gone. - Page 6 www.crateamps.com ©1999 SLM Electronics A Division of St. Louis Music Co. 1400 Ferguson Avenue St. Louis, MO 63133 P/N 47-831-01 09/99...