Table of Contents
Advertisement
Selecting the night bright-
ness:
Switch on the vehicle lights
and programme the bright-
ness value. The car radio's
lighting connector must be
hooked up to the vehicle's
electric system for this to
function properly.
LED ON
Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
LEARN KC
To "train" a second Key-
Card.
Please read the information
in chapter "KeyCard theft
protection system - "Train-
ing" a second KeyCard".
44
READ KC
To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6..) and the serial
number.
With the extra card it is pos-
sible to display the Short
Additional Memory (S.A.M.)
data entered by your spe-
cialised dealer. See chapter
"Short Additional Memory
S.A.M.".
If you remove the KeyCard
during the reading process,
"READ KC" will show on the
display panel. The unit con-
tinues to play but does not
accept any operations ex-
cept from being switched
off. Re-insert the card.
PTY LANG
To select the programme
type language:
DEUTSCH or ENGLISH
SCANTIME Use this function to set the
scan time for the radio or
CD player from between five
and 30 seconds.
S-DX
To adjust the seek tuning
sensitivity for distant recep-
tion.
DX 1 - high sensitivity
DX 3 - low sensitivity
S-LO
To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 - high sensitivity
LO 3 - low sensitivity.
CD UPD
Use this function to clear CD
names in order to free mem-
ory space for new discs.
See "Deleting a CD name
with DSC-UPDATE".
VOL FIX
Use this function to select
the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
ume level with << >>. When
adjusted to "VOL 0", the
system will come on with the
volume selected before
switching the radio off.
Hide quick links:
Advertisement
Table of Contents
