Table of Contents
Advertisement
Installation information
The Auxiliary jack G1 must always be installed on the left-hand side of the monitor trim AT.
Ensure that the cables/lines are not kinked or damaged as you install them in the car. The costs incurred
as a result of this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are already used, bridges, double crimps or twin-lead terminals must be
used.
Deburr holes and treat them with anti-corrosive coatings as set out in BMW directives to protect them
from corrosion.
Ordering instructions
The monitor trims AC/AT are not supplied in the retrofit kit and must be ordered separated in the interior
trim colours of the car or in a primed finish (see EPC for part numbers and further details).
The multimedia changer L is not included in the retrofit kit and must be ordered separately for the
appropriate region code (see EPC for part number and further details).
The monitor AA is not included in the retrofit kit and must be ordered separately (see EPC for part
number and further details).
List of special equipment
SA 456
Comfort seat, front
SA 601
TV function
Special tools required
00 9 317, Installation wedge
© BMW AG, München
01 29 0 406 372
12.2005 (Z/Z)
2
Hide quick links:
Advertisement
Table of Contents
