Table of Contents
Advertisement
The cap and the crown of each burner are
secured with two screws. To separate the two
pieces, lift the cap, turn it upside down, then undo
the two fixing screws as shown in Fig. 3.
After a thorough cleaning, reassemble the two parts and
refit the cap in its correct position on the burner.
Periodic maintenance
Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety features, it is necessary that the taps are
periodically lubricated.
The periodic lubrication of the taps must be carried out by qualified personnel, which
you must refer to also in case of malfunctioning.
Something Not Working?
If the hob is not working correctly, please carry out the following checks before
contacting your local Service Force Centre.
SYMPTOM
There is no spark when lighting the
gas
The gas ring burns unevenly
Fig. 3
SOLUTION
Check the mains fuse has not blown
Check the burner cap and crown
have been replaced correctly, e.g.
after cleaning.
Check the main jet is not blocked
and the burner crown is clear of food
particles.
Check the burner cap and crown
have been replaced correctly, e.g.
after cleaning.
FO 2265
43
Advertisement
Table of Contents
